Current Location : >>Other Capacities >> Rubber Molding
     Rubber Molding
    Compression molding is the oldest and simplest way to make rubber products. This method take longer to cure the rubber and each     slug of rubber is often hand loaded into each cavity. However, due to the simplicity of the mold, it is the most economical mold to     buy. We have experiences in manufacturing rubber products for international customers. Most recently, we made windshield wipers     in EPDM and Natural Rubber. We also made rubber window seals for a Tier 1 auto parts supplier in Canada.
    Process:
       *  First, open the mould and put. A precut or shaped "slug " of uncured rubber, at a set weight, is placed into the cavity.
       *  Close the mould and place back into the press, then heat and cure the rubber.
       *  After cooling, open the mould and remove the rubber parts.
       *  The excess rubber, called flash, needs to be trimmed off the part. .
process
    Pros:
       *  Lowest mold cost .
       *  Making mould fast, about 8~10 days for simple shape part .
       *  Little "throw away" material provides advantage on expensive compounds.
       *  Often better for large parts .
    Cons:
       *  Offers least product consistency..
       *  Difficult to control flash.
    Material:
       *  NBR;EPDM;Silicon Rubber;FPM; Neoprene,etc
     Products & Equipment
Email:
China Plastic provides turn-key services for molding plastic in China - chinaplastic.org - ©2005-2017 Shanghai Sourcing Ltd.

China Plastic

Chinese Molding, Mold Makers, Chinese Plastic Manufacturers

Email :
快乐赛车 一分pk10官方网站 赢彩票 优优彩票 优优彩票 三分pk10开奖 一分PC蛋蛋 优优彩票 三分pk10 优优彩票